Home | Bearing Blog | Facebook | Instagram Welcome to Enderui bearing website

Stock list

Bearings use must pay attention to the problem

Author:   Date:2014/9/25

In mechanical equipment operation of our production, in order to ensure maximum safety and reliability of machinery and operator, suggest that no matter how long mechanical equipment vehicle age you must be inspected regularly, and the necessary maintenance, replacement of bearings mechanical equipment in time. In the inspection process must pay attention to whether the early warning signal of bearing wear: including any noise or mechanical friction when rotating speed is not normal.
Such as hear a part of machinery and equipment issued to murmur. First of all, must find murmurs occur position. There are many possible noise generated by moving parts of machinery, but also may be some rotating parts and the non rotating part occurs (such as contact bearing damage or breakage to drive the transmission shaft). If the confirmation is the bearing of noise, so when the bearing may be damaged, replacement of the new bearings must be timely, to ensure the normal operation of machinery. Because the bearing of some parts are symmetric, so when one side of the bearing damage, bearing on the other side even if no damage shall be even if the replacement, so as to avoid the two damage to both sides of the transmission of unbalanced stress caused machinery.
The bearing is more sensitive components, therefore, in any case, the installation of bearings in machinery are required to adopt the right approach and the right tools. In the process of storage and transportation and installation, bearing parts can not be damaged. Some bearings require greater pressure pressing, so need special tools.
At the same time when mounting bearings should be in clean environment, even small particles not visible to the naked eye into the bearing will shorten the service life of the bearing. Keep the environment clean replacement of bearings is very important. At the same time, the installation does not allow the use of hammer knocking bearing.

Relative News

Relative Products

There is no message.

Online Messages

Company:
Email:
Message:
ValidateCode:
click refresh <--Not see, click refresh

HOME Bearing Brand News Company Contact Payment Service Delivery Guide

LIAOCHENG ENDERUI BEARING Co., Ltd.  TEL:+86 13561215822  FAX:+86-635-8429396  LinksQQ:
Technical Support:zcwz.com